Room size
Your floor plan
1
Upload the landlord's drawing, an architect's PDF or a photo of a sketch. It sits under the grid so you can draw the real room over it.
3
Rooms are rarely a clean rectangle. Trace the inside corners and the planner uses that outline for the plan, the clash checks and the 3D walls.
4
Doors and windows snap to the nearest wall. Equipment that blocks a door swing or sits outside the walls turns red.
Start from a template
A template swaps in a typical equipment list for that kitchen type and arranges it. Undo brings your layout back.
Arrange
Claude picks models from the catalogue and the stainless you'd need, then the layout rules place them. This replaces the current layout. You can undo it.
Add the equipment you want, then let the planner arrange it. Describing a kitchen in words works on the published page inside Claude, not in the offline file.
The planner puts the cooking line on the longest wall under a hood, a pass table in front of it, cold storage and warewashing on the side walls, prep and sinks opposite, and countertop machines onto tables. It keeps 900 mm clear in front of every unit.
Equipment
Stainless fabrication
Drawing set
The PDF is drawn to scale with a title block: equipment plan, utilities plan, four wall elevations and the schedules. Print at 100% to keep the scale.
Catalogue dimensions were read from manufacturer or dealer spec pages (linked on each row). Confirm against the current spec sheet before ordering or fabricating.